Michael -'s community posts
Delay compared to other Tools
Michael -,
User (Posts: 9)
Aug 14, 2020 9:59:52 am EDT
Support level: Free or trial
Hello,
today i tested 3 Remote Tools and while i prefer RU for all the configuration possibilities, its the only one with a 1,5second delay. Even if i just mouse over a desktop icon it takes over 1 second for it to be shown on screen. Or when i click a icon. the other 2 competitors take just some miliseconds.
Is that normal for RU? I already changed the FPS to 25 but it did not help. Would a RU server speed up the speed of RU? I am from Europe, has it to do with the RU servers to be far away?
Thanks for this great tool.
today i tested 3 Remote Tools and while i prefer RU for all the configuration possibilities, its the only one with a 1,5second delay. Even if i just mouse over a desktop icon it takes over 1 second for it to be shown on screen. Or when i click a icon. the other 2 competitors take just some miliseconds.
Is that normal for RU? I already changed the FPS to 25 but it did not help. Would a RU server speed up the speed of RU? I am from Europe, has it to do with the RU servers to be far away?
Thanks for this great tool.
RU Server Problem
Michael -,
User (Posts: 9)
Mar 23, 2019 11:56:42 am EDT
Support level: Free or trial
OK change of plans, the new software did cost me some money but so did the server I rented for Remote Utilities. They didnt offer 2factor Authentication so I am back to Remote Utilities.
Now with "DEFAULT" server only it is working, I hope that is secure, thanks for the help.
Now with "DEFAULT" server only it is working, I hope that is secure, thanks for the help.
Edited:Michael - - Mar 23, 2019 11:57:15 am EDT
RU Server Problem
Michael -,
User (Posts: 9)
Mar 23, 2019 9:16:04 am EDT
Support level: Free or trial
Sorry, you can close the ticket, I gave up and switched to a different solution :/ Honestly your Remote Desktop would be the most amazing thing if it worked, but also the problems with the icon that cant be clicked and the connection problems really are a pain. The other solution did costs me a bit of money but all 3 pcs setup worked within 20 minutes connecting in all directions.
Still I think your solution would be best with the server and all the options for security, I hope you have success with your tool I really want your software to work.
PS: After uninstalling Remote Utilities, the Folder inside the AppData will NOT get deleted! Really dangerous, also the Registry Key will not get deleted had to do that all manually.
Still I think your solution would be best with the server and all the options for security, I hope you have success with your tool I really want your software to work.
PS: After uninstalling Remote Utilities, the Folder inside the AppData will NOT get deleted! Really dangerous, also the Registry Key will not get deleted had to do that all manually.
RU Server Problem
Michael -,
User (Posts: 9)
Mar 20, 2019 4:50:48 pm EDT
Support level: Free or trial
Thanks a lot, ....LAN connects are again stuck and wont come online again firewall is deactivated, also the windows firewall, restarting the host is the only thing that works to make them go online again on the viewer.
Edited:Michael - - Mar 20, 2019 4:56:27 pm EDT
RU Server Problem
Michael -,
User (Posts: 9)
Mar 20, 2019 3:44:03 pm EDT
Support level: Free or trial
Hello, thanks for your reply. I did follow the guide as best as I understood it for setting up everything.
I rented the windows server just for Remote Utilities.
Server: Windows Server 2016
PC1: host & viewer
PC2: host & viewer
PC3: host only
Ports: 5640 hosts and 5660 for server
As you can see on the screenshot I made all 3 PCs once with Internet-ID for Remote acces, and a second LAN connection for every PC to connect on LAN. The connection on LAN works.
But as you see on the Screenshot, I cant connect. As soon as I start the viewer the 3 Internet-ID based connections show as "online" and the 3 LAN connections just show the wait icon.
As soon as I restart the Host (right mouse button, restart host) the LAN connection shows as online and I can connect. Refresh Status has no effect cant do anything, only option is to restart the host. On screenshot 3 you see after I restart the host it will show the PC as online. But that cant be the solution to every time i restart my Viewer PC i have to restart all hosts so they show up as online. I could not restart the host on PC1 because the menu when clicking the icon didnt not open, I dont know why this is always happening with that icon. All other icons in Tray work. After stopping the server manually and starting it again, the icon is clickable again.
For the Internet-ID based PCs they show online for about 1 minute then they all go offline for 1 second or less and all go online again at the same time, thats a infinite loop. See Screenshot 2 (its only for half a second maybe). Last time that only happened with 1 PC, now it is happening with all 3 of them at the same time. Its just sometimes the icon wont open the right-mouse button menu to restart the host, its very annoying that goes on all day every minute and it shows every minute the notification ot4gpc has gone online on bottom left corner, every minute.
I dont havy any kind of Anti Virus software with real time scanning on my PCs (I also deactivated Windows Defender), only a Firewall and that one is deactivated for the time beeing. If I try to connect to one of the 3 Internet-ID based connections i get the error and the host goes offline. After pressing refresh status, they show as online again.
I disabled the PIN now and got a new Internet-ID, the new ID shows up on the Server to, restarted the server also. But it still is the same error.
I dont know what to do anymore, its very frustrating because i spend already so much time on this, even rented the server for it.
*EDIT* I send now the logs to the support Mail, also I added a screenshot from the viewer after I connected directly to all 3 PCs they show up as green inside my viewer, but the Internet-ID based connection still has the same error. Connection is set to Auto and PIN is removed. User is only 1 on the system. I also renewed my Internet-IDs and updated the Viewer address book.
Also after restarting all 3 hosts for LAN connection only 1 shows up, the other 2 are stuck again, see screenshot viewer5 :/ have to restart the host again so it will be online...
I rented the windows server just for Remote Utilities.
Server: Windows Server 2016
PC1: host & viewer
PC2: host & viewer
PC3: host only
Ports: 5640 hosts and 5660 for server
As you can see on the screenshot I made all 3 PCs once with Internet-ID for Remote acces, and a second LAN connection for every PC to connect on LAN. The connection on LAN works.
But as you see on the Screenshot, I cant connect. As soon as I start the viewer the 3 Internet-ID based connections show as "online" and the 3 LAN connections just show the wait icon.
As soon as I restart the Host (right mouse button, restart host) the LAN connection shows as online and I can connect. Refresh Status has no effect cant do anything, only option is to restart the host. On screenshot 3 you see after I restart the host it will show the PC as online. But that cant be the solution to every time i restart my Viewer PC i have to restart all hosts so they show up as online. I could not restart the host on PC1 because the menu when clicking the icon didnt not open, I dont know why this is always happening with that icon. All other icons in Tray work. After stopping the server manually and starting it again, the icon is clickable again.
For the Internet-ID based PCs they show online for about 1 minute then they all go offline for 1 second or less and all go online again at the same time, thats a infinite loop. See Screenshot 2 (its only for half a second maybe). Last time that only happened with 1 PC, now it is happening with all 3 of them at the same time. Its just sometimes the icon wont open the right-mouse button menu to restart the host, its very annoying that goes on all day every minute and it shows every minute the notification ot4gpc has gone online on bottom left corner, every minute.
I dont havy any kind of Anti Virus software with real time scanning on my PCs (I also deactivated Windows Defender), only a Firewall and that one is deactivated for the time beeing. If I try to connect to one of the 3 Internet-ID based connections i get the error and the host goes offline. After pressing refresh status, they show as online again.
I disabled the PIN now and got a new Internet-ID, the new ID shows up on the Server to, restarted the server also. But it still is the same error.
I dont know what to do anymore, its very frustrating because i spend already so much time on this, even rented the server for it.
*EDIT* I send now the logs to the support Mail, also I added a screenshot from the viewer after I connected directly to all 3 PCs they show up as green inside my viewer, but the Internet-ID based connection still has the same error. Connection is set to Auto and PIN is removed. User is only 1 on the system. I also renewed my Internet-IDs and updated the Viewer address book.
Also after restarting all 3 hosts for LAN connection only 1 shows up, the other 2 are stuck again, see screenshot viewer5 :/ have to restart the host again so it will be online...
Edited:Michael - - Mar 23, 2019 9:18:13 am EDT
RU Server Problem
Michael -,
User (Posts: 9)
Mar 19, 2019 7:11:33 pm EDT
Support level: Free or trial
Hello, setting it to AUTO did not change the error message, same error.
The Server is a hosted Windows 2016 server i rent from a hosting company.
I use DNS to connect to the server.
The Server is a hosted Windows 2016 server i rent from a hosting company.
I use DNS to connect to the server.
Edited:Michael - - Mar 23, 2019 9:18:31 am EDT
Mouse not working on specific area
Michael -,
User (Posts: 9)
Mar 16, 2019 10:09:15 am EDT
Support level: Free or trial
I got a strange problem, if i connect to my other PC I noticed I could not click on a button, I didnt understand why. Then i realized there is a specific area the mouse just wont work when connecting with Remote Utilities. Just to confirm I tested it with a different remote tool and everything worked.
Can anyone explain this? The whole area on the screenshot will be ignored by RemoteUtilities. I can move the mouse there, but clicking it wont recognize.
Can anyone explain this? The whole area on the screenshot will be ignored by RemoteUtilities. I can move the mouse there, but clicking it wont recognize.
RU Server Problem
Michael -,
User (Posts: 9)
Mar 16, 2019 9:11:49 am EDT
Support level: Free or trial
It seems to work now, after re-installing everything.
But I still got one big problem. I cant connect to any of my PCs with Internet-ID with custom server. Everytime i try to connect i get the error "Custom Server Security Authorization Error" and I don't know why. I have one Server, 3 PCs and 1 User.
On the RU-Server:
- Pin Code: 8 numbers
- Require Pin on Viewer: On
- Enable Permission Based Internet-ID Access: Username
I am logged in with the same user (have only one) and I get the Internet-ID and see on my Viewer my PC where I added the Host to my Address Book. So everything fine here.
On the Host:
- Dashboard / Internet-ID connection:
Status: Ready for connection (Correct port, Pin code added same as on RU Server)
Authorization: Single password: On
Custom Server Security: On
User and access control: logged in with same user (allow on all checkboxes)
Modes: All
2-factor Auth: On
On the Viewer:
- General: Internet-ID Connection (customserver IP, Port and correct PIN)
- Security: Single Password Security on, but do I even need it for not LAN connections?
- Authorization: Custom Server Security (both check-boxes On)
Shouldn't it work? I am logged in with the same user on the viewer. I tried already disabling Pin, didn't help.
The connection for LAN works with Single Password Security, its just the connection by Internet-ID gives me that error.
*EDIT* I have again the problem with the disconnect/connect every 40 seconds on the 3rd PC, is there no other solution the doing all over again everything to solve this? I sit here now already since almost 6 hours and I dont get this to work :/ Its still disconnecting & connecting for one PC all the time. EDIT: Now it changed to a different PC, that one is now with the same problem and the other one is working, this is killing me... it always disconnected for 1 second, then stays online for 1 minute or so, loop.
*EDIT2* This seems like never ending, after restarting the PC with the Viewer, all the LAN/Direct connections wont connect anymore, just a hourglass symbol.... ping and refresh status are not doing anything. I had to Restart the HOST on all PCs so it would work again, thats not a solution, I cant every time I restart my PC restart on all Hosts the Host program :/ This is really frustrating working all day on this and nothing works.
*EDIT3* The menu that should appear when clicking with the right mouse button on the HOST icon in tray wont open... have to shut it down with the Task Manager. That is the second time this happens today. I really want to like this program, it has awesome features, but it just won't work. Wasted my whole Saturday on this.
But I still got one big problem. I cant connect to any of my PCs with Internet-ID with custom server. Everytime i try to connect i get the error "Custom Server Security Authorization Error" and I don't know why. I have one Server, 3 PCs and 1 User.
On the RU-Server:
- Pin Code: 8 numbers
- Require Pin on Viewer: On
- Enable Permission Based Internet-ID Access: Username
I am logged in with the same user (have only one) and I get the Internet-ID and see on my Viewer my PC where I added the Host to my Address Book. So everything fine here.
On the Host:
- Dashboard / Internet-ID connection:
Status: Ready for connection (Correct port, Pin code added same as on RU Server)
Authorization: Single password: On
Custom Server Security: On
User and access control: logged in with same user (allow on all checkboxes)
Modes: All
2-factor Auth: On
On the Viewer:
- General: Internet-ID Connection (customserver IP, Port and correct PIN)
- Security: Single Password Security on, but do I even need it for not LAN connections?
- Authorization: Custom Server Security (both check-boxes On)
Shouldn't it work? I am logged in with the same user on the viewer. I tried already disabling Pin, didn't help.
The connection for LAN works with Single Password Security, its just the connection by Internet-ID gives me that error.
*EDIT* I have again the problem with the disconnect/connect every 40 seconds on the 3rd PC, is there no other solution the doing all over again everything to solve this? I sit here now already since almost 6 hours and I dont get this to work :/ Its still disconnecting & connecting for one PC all the time. EDIT: Now it changed to a different PC, that one is now with the same problem and the other one is working, this is killing me... it always disconnected for 1 second, then stays online for 1 minute or so, loop.
*EDIT2* This seems like never ending, after restarting the PC with the Viewer, all the LAN/Direct connections wont connect anymore, just a hourglass symbol.... ping and refresh status are not doing anything. I had to Restart the HOST on all PCs so it would work again, thats not a solution, I cant every time I restart my PC restart on all Hosts the Host program :/ This is really frustrating working all day on this and nothing works.
*EDIT3* The menu that should appear when clicking with the right mouse button on the HOST icon in tray wont open... have to shut it down with the Task Manager. That is the second time this happens today. I really want to like this program, it has awesome features, but it just won't work. Wasted my whole Saturday on this.
Edited:Michael - - Mar 16, 2019 7:31:09 pm EDT
RU Server Problem
Michael -,
User (Posts: 9)
Mar 16, 2019 9:09:37 am EDT
Support level: Free or trial
Hello, I installed RU server on my Windows 2016 server, managed to get it to run, on PC1 i logged in with the user i gave permission and I see my PC2 in my address book. Its online, I can connect. But then it goes Offline in the list and online again, it switches every minute. 1 Minute the PC is online, 1 Minute the PC is offline switches all the time, i get notification "xxx is online" then i can connect again, then after a minute its offline again and so on all the time. Don't know what I do wrong.